Control & Monitoring Systems
Control & Monitoring Systems from simple on/off control to sophisticated microprocessor-based controllers & sensors that provide temperature & moisture detection.
Click on the + heading below for more information
+
-
Mechanical Thermostats
The AMC-1A ambient-sensing thermostat is designed to control heat-tracing systems used for freeze protection in non-hazardous locations.
The AMC-1B line-sensing thermostat is designed to control heat-tracing systems in non-hazardous locations.
The AMC-1H ambient-sensing thermostat is designed to control heat-tracing systems used for freeze protection in hazardous locations.
The AMC-2B-2 line-sensing thermostat is designed to control heat-tracing systems in non-hazardous locations.
The AMC-F5 thermostat is designed to control heat-tracing systems used for freeze protection in non-hazardous locations.
The E507S-2LS-2 thermostat is designed to control heat-tracing systems in hazardous locations.
The E507S-LS thermostat is designed to control heat-tracing systems in hazardous locations.
+
-
Electronic Controllers
SST-2 40° F fixed temperature thermostat with ground fault protection.
ACCS-30 Advanced Commercial Control System is a state of the art, multi-circuit electronic control & monitoring system.
The APS-3B provides effective, economical automatic control of snow melting applications for walkways, ramps, driveways, gutters & downspouts.
The APS-4 provides effective, economical automatic control of snow melting systems including those for gutter & down spouts.
C910 is a compact, full featured, microprocessor-based, single-point commercial heating cable controller. The C910 provides control & monitoring of electrical heating cable circuits for commercial heating applications, with built-in 30 mA ground-fault protection.
The EC-TS is an ambient, pipe or slab sensing thermostat that provides accurate temperature control, 30 amp switching, visual indication & sensor monitoring, all at a very economical price.
The computerized FWT-3 thermostat assures comfort with minimum energy cost by automatically controlling electric radiant floor heaters.
The computerized GIT-3A Automatic Gutter Ice Melting Control operates ice melting heaters only while required thus insuring energy efficiency & low operating costs.
The computerized GIT-4 Automatic Gutter Ice Melting Control operates ice melting heaters only while required thus insuring energy efficiency & low operating costs.
The HWAT-ECO electronic controller provides flexible temperature control & energy savings for the HWAT hot water temperature maintenance system.
The LCD-1 Snow Switch is ideally suited for cost-sensitive residential & commercial snow melting applications.The CIT- 1 Snow Sensor detects falling or blowing snow as precipitation at temperatures below 38°F(3.3°C).
+
-
Snow Moisture Sensors
The CIT– 1 Snow Sensor detects falling or blowing snow as precipitation at temperatures below 38°F(3.3°C).
The GIT-1 Gutter Ice Sensor is for use in an automatic ice melting control system for gutters & downspouts employing an APS- 3B or APS-4 Control Panel. Heaters operate only while required thus saving energy & ensuring reliable ice melting.
The SIT-6E Pavement-Mounted Sensor signals for the heating cable to turn on when the pavement temperature falls below 38º Fahrenheit (3.3º Celsius) & precipitation, in any form, is present.The RTD10 & RTD20 are three-wire platinum RTDs (resistance temperature detectors) typically used with control & monitoring systems when accurate temperature control is required. These RTDs are designed to withstand highly corrosive applications.
+
-
RTD's
The RTD10 & RTD20 are three-wire platinum RTDs (resistance temperature detectors) typically used with control & monitoring systems when accurate temperature control is required. These RTDs are designed to withstand highly corrosive applications.
The RTD-200 is a three-wire, ambient sensing Platinum RTD (Resistance Temperature Detector) typically used in non-hazardous & CID2 locations.
The RTD-3CS & RTD-10CS are three-wire platinum RTDs (resistance temperature detector) typically used with monitoring & control systems such as DigiTrace 910 controller when accurate temperature control is required. Used in non-hazardous & CID2 locations.
The RTD-4AL is a three-wire platinum, pipe mounted (resistance-temperature detector) RTD typically used with monitoring & control systems that require accurate temperature control. Used in non-hazardous & CID2 locations.
The RTD-7AL temperature sensor is a three-wire platinum, pipe mounted (resistance-temperature detector) RTD typically used with monitoring & control systems when accurate temperature control is required. Used in CID1 locations.
+
-
Contactors
The E104 is a three-pole, 100-amp-per-pole, 600-Vac maximum contactor, housed in a UL Listed, CSA Certified, NEMA 4X enclosure with two 1-inch conduit entries.
The E304 is a three-pole, 40-amp-per-pole, 600-Vac maximum contactor housed in a UL Listed, CSA Certified, NEMA 4X enclosure with two 1-inch conduit entries.
The E307 is a three-pole, 40-amp-per-pole, 600-Vac maximum contactor housed in NEMA 4, 7, 9 aluminum enclosure with two 1-inch NPT entries.
Click on the + heading below for more information
+
-
Mechanical Thermostat Datasheets (PDF)
AMC1-A Datasheet (244kb)
AMC1-B Datasheet (244kb)
AMC1-H Datasheet (272kb)
AMC-2B-2 Datasheet (176kb)
AMC-F5 Datasheet (208kb)
E507S-2LS-2 Datasheet (278kb)
E507S-LS Datasheet (272kb)
+
-
Electronic Controller Datasheets (PDF)
SST-2 Datasheet (212kb)
ACCS-30 Datasheet (584kb)
APS-3B Datasheet (480kb)
APS-4 Datasheet (476kb)
C910 Datasheet (264kb)
EC-TS Datasheet (412kb)
FWT-3 Datasheet (144kb)
GIT-3A Datasheet (324kb)
GIT-4 Datasheet (356kb)
HWAT-ECO Datasheet (116kb)
LCD-1 Datasheet (80kb)
SST-2 Installation Instructions (292kb)
+
-
Snow Moisture Sensor Datasheets (PDF)
CIT-1 Datasheet (308kb)
GIT-1 Datasheet (308kb)
SIT-6E Datasheet (308kb)
+
-
RTD Datasheets (PDF)
RTD 10/20 Datasheet (128kb)
RTD-200 Datasheet (156kb)
RTD-3CS/10CS Datasheet (292kb)
RTD-4AL Datasheet (168kb)
RTD-7AL Datasheet (124kb)
+
-
Contactor Datasheets (PDF)
E104 Datasheet (172kb)
E304 Datasheet (172kb)
E307 Datasheet (172kb)
Click on the + headings below for more information
+
-
DigiTrace
Heat-Tracing Control & Monitoring Systems including innovative Single & Multipoint systems, as well as supervisory software.
+
-
ETI
Environmental Technology, Inc. (ETI) has been the snow & ice melting leader for over 30 years. ETI offers a complete line of automatic controllers for snow melting & roof & gutter de-icing applications.
+
-
Pyrotenax
Established in 1949, Pyrotenax quickly became a leader in the field of manufacturing mineral-insulated cables & accessories for the wiring, heating, & temperature measurement industries. Currently, their applications include critical circuit cables for petrochemical, commercial, & industrial processing; critical life-safety circuit cables; pipe tracing; electronic controls; snow/ice melting; waterline freeze prevention; thermoelectric cables for temperature sensing & maintenance.
+
-
Raychem
Raychem brand of self-regulating & power-limiting heat-tracing products continue to be recognized as the finest in the world for the Industrial, Commercial, & Residential markets. Raychem is also a world leader in polymer science technology, with an impressive product portfolio that includes high temperature wire for jet aircraft, & heat-shrinkable polymers for electric insulation.
+
-
Tyco Thermal Controls
Tyco Thermal Controls is a global company providing optimal solutions for various applications involving heat tracing, floor heating, snow melting & de-icing, temperature measurement sensors, fire rated wiring products, & leak detection systems.
